R7 Hose Ferrule

R7 Thermoplastic Hydraulic Hose Ferrules

Shop R7 hydraulic hose ferrules for building 2-piece thermoplastic hydraulic hose assemblies. These crimp ferrules are designed to be matched with compatible fitting stems and R7 thermoplastic hydraulic hose for a properly crimped hose assembly.

Ferrules for R7 Thermoplastic Hydraulic Hose

R7 hydraulic hose uses thermoplastic construction rather than the rubber and steel-wire construction commonly found in standard hydraulic hose. The correct ferrule must be selected for the specific hose and fitting system.

R7 hose ferrules are intended for compatible:

• SAE 100R7 hydraulic hose

• Thermoplastic hydraulic hose

• Non-conductive hydraulic hose

• 2-piece hydraulic fitting stems

• Hydraulic hose crimp assemblies

• Bucket truck and aerial lift hose applications

R7 Hydraulic Hose Crimp Ferrules

A 2-piece hydraulic fitting uses a separate fitting stem and ferrule. The ferrule fits over the outside of the hose and is crimped around the fitting stem to create the completed hydraulic hose assembly.

When selecting an R7 ferrule, verify:

• Hydraulic hose series

• Hose inside diameter

• Hose outside diameter

• Fitting stem series

• Ferrule part number

• Required crimp diameter

• Manufacturer crimp specifications

Ferrules for Non-Conductive Hydraulic Hose

For applications requiring non-conductive hydraulic hose, all components of the hose assembly must be selected according to the hose and fitting manufacturer's specifications.

Do not select a ferrule based only on nominal hose size. Different thermoplastic hoses can have different outside diameters, construction, and crimp requirements.

Always verify that the R7 hose, fitting stem, ferrule, and crimp specification are compatible before putting the completed hydraulic hose assembly into service.

Shop R7 thermoplastic hydraulic hose ferrules by hose size below.