R2/R16 Hose Ferrule

R2/R16 Hydraulic Hose Ferrules

Shop R2/R16 hydraulic hose ferrules for building 2-piece hydraulic hose assemblies. These crimp ferrules are designed to be matched with compatible fitting stems and hydraulic hose for a properly crimped hose assembly.

2-Piece Ferrules for R2 & R16 Hydraulic Hose

Two-piece hydraulic fittings use a separate fitting stem and crimp ferrule. This allows the correct ferrule to be selected based on the hydraulic hose construction, size, and fitting system.

R2/R16 ferrules are intended for compatible:

• SAE 100R2 hydraulic hose

• SAE 100R16 hydraulic hose

• 2-wire hydraulic hose

• 2-piece hydraulic fitting stems

• Hydraulic hose crimp assemblies

Hydraulic Hose Crimp Ferrules

The ferrule fits over the outside of the hydraulic hose and is crimped around the fitting stem to create the completed hydraulic hose assembly.

When selecting an R2/R16 hose ferrule, verify:

• Hydraulic hose series

• Hose inside diameter

• Hose outside diameter

• Fitting stem series

• Ferrule part number

• Required crimp diameter

• Manufacturer crimp specifications

Match the Hose, Stem & Ferrule

Proper component selection is critical when assembling a 2-piece hydraulic hose fitting.

Do not select a ferrule based only on the nominal hose size. Different hydraulic hose constructions can have different outside diameters and crimp requirements.

Always verify that the R2 or R16 hydraulic hose, fitting stem, ferrule, and crimp specification are compatible before putting the completed hose assembly into service.

Shop R2/R16 hydraulic hose ferrules by hose size below.